proPERLA® Primer

PRIMER FOR PREPARATION OF POROUS SURFACES





proPERLA® Primer is a special water-based primer for proPERLA® Facade Coatings with solidifying effect and high penetration depth. It is diffusively and adherent and only suitable for porous surfaces.

RECOMMENDED FOR

All mineral building surfaces.

PREPARATION

Complete facade cleaning with high pressure is necessary to eliminate organic components such as mold, algae or moss, stains, etc.

APPLICATION

Use an airless sprayer or sprayer. A minimum temperature of 5 °C is required. The primer must be completely absorbed. Ensure that after drying no glossy film exists. Low absorbent surfaces such as clay or fiber-cement panels need to be primed thinly. For very porous substrates proPERLA® Primer may be diluted 1: 1 with water. proPERLA® Primer is not suitable for non-porous substrates.

Note: Components that don’t need to be treated have to be protected from splashes - eg by covering - as dried proPERLA® Primer is very difficult to remove. Once the primer is dry, proPERLA® Facade Coating can be applied.

COVERAGE RATE

150-200 ml per m2, depending on porosity.

DRYING TIME

3 – 5 hours at 20° C and 65% RH. Lower tempe-ratures and higher humidity extend the drying time accordingly.

PACKING SIZE

10 Litre Pots (40 Pots per pallet)

PRINTED DOCUMENTS

Brochures and door hangers for our sales partners.
ppfcbudh

DEMO BAGS

Show to your customers the beading effect of proPERLA® with our demo bag.
ppfcst

DEMO PUMP

Demonstrate the breathability of facades treated with proPERLA®.
proPERLA - Pumpe

PUMPE GRACO
795 ULTRA MAX II

With a 2.2 hp brushless DC motor, the Ultra Max II 795 can handle multiple guns and is ideal for the professional residential remodeling and repainting contractor who sprays a wide variety of facade and roofcoatings.

Included in delivery: GRACO airless gun, nozzle holder RAC X, nozzle LTX421, hose 15m, 100cm extension with nozzle holder RAC X

• Maximum Delivery 3.6 LPM
• Weight 45 KG
• Generator Minimum 5000 W
• Noise Level 91dBa
• Electric engine 230V

AIRLESS GUN

GRACO Airless gun (inkl. nozzle & nozzle holder)

• minimal spitting of the gun
• fast and even needle shut-off
• convenient trigger locking
• Easyglide - gun swivel
• sealed spring
• low weight gun
• ergonomic gun handle
• removable guard

JET-ROLLER

GRACO JetRoller Airless Sprayer Saves Time & Money – Combines rolling and spraying into one action In-line Valve – Eliminates dipping the roller in paint and is up to 2x faster than standard rolling Easily Detachable Handle – Use the spray extension or hand roller independently Better Tip Technology – Overspray is virtually eliminated CleanShot™ Shut-Off Valve – Eliminates spits and drips Flexible Design – Uses industry standard roller covers and extensions